www.Race24.com: International motorcycle racing information for teams, sponsors and spectators...
Home | Championship | News | Bikes | Circuits | Photos | About | Links | Message Board |
|
|
MV Augsta F4 1000R - Bike Specifications |
|
MV Augsta F4 1000R Specifications refer to the road model, not the version used in races. 
ENGINE Type Four cylinder, 4 stroke, 16 valve Timing system “D.O.H.C”, radial valve Total displacement 998 cm3 (60.8 cu. in.) Compression ratio 13:1 Starting Electric Bore x stroke 76 mm x 55 mm (3.0 in. x 2.2 in. ) Max. horse power - r.p.m. (at the crankshaft) 128 Kw (174 HP) at 11900 - Lim. 13000 r.p.m. Max. torque - r.p.m. 111 Nm (11.3 Kgm) at 10000 r.p.m. Cooling system Liquid cooled, water-oil heat exchanger Engine management system “Weber Marelli” 5SM ignition - injection integrated system; induction discharge electronic ignition,“Multipoint” electronic injection Clutch Wet, multi - disc Gear Box Cassette gearbox; six speed, constant mesh Primary drive 50/79 Gear ratio Final velocity ratio 15x40 ELECTRICAL EQUIPMENT Voltage 12 V Alternator 650 W at 5000 r.p.m. Battery 12 V - 9 Ah DIMENSIONS AND WEIGHT Wheelbase 1408 mm (55.40 in.) Overall lenght 2007 mm (79.01 in.) Overall width 685 mm (26.97 in.) Saddle height 810 mm (31.87 in.) Min. ground clearance 130 mm (5.12 in.) Trail 103,8 mm (4.08 in.) Dry weight F4 1000 R: 192 Kg (423.3 lb) - F4 1000 R 1+1: 193 Kg (425.5 lb) Fuel tank capacity 21 l (5.54 U.S. gal.) - reserve fuel: 4 l (1.05 U.S. gal. ) PERFORMANCE Maximum speed* 301,0 Km/h (187.0 mph) FRAME Type CrMo Steel tubular trellis (TIG welded) Rear swing arm pivot plates: material Aluminium alloy FRONT SUSPENSION Type “UPSIDE - DOWN” telescopic hydraulic fork with rebound-compression damping and spring preload adjustment Rod dia. 50 mm (1.97 in.) with carbonitriding treatment Travel on leg axis 129 mm (5.07 in.) REAR SUSPENSION Type Progressive, single shock absorber with rebound and compression (High speed / Low speed) damping and spring preload (hydraulic control) Single sided swing arm: materiale Aluminium alloy Wheel travel 120 mm (4.72 in.) BRAKE Front brake Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking band and aluminum flange Front brake caliper Radial-type with 4 pistons - Ø 34 mm (Ø 1.34 in.) Rear brake Single steel disc with Ø 210 mm (Ø 8.27 in.) diameter Rear brake caliper With 4 pistons - Ø 25,4 mm (Ø 1.00 in.) RIM Front: Material / size Forged aluminium alloy 3.50 ” x 17 ” Rear: Material / size Forged aluminium alloy 6.00 ” x 17 ” TYRES Front 120/70 - ZR 17 (58W) Rear 190/55 - ZR 17 (75 W) FAIRING Material Thermoplastic MV Agusta Motor S.p.A. is committed to the constant improvement of our products.Therefore the information and technical characteristics of the vehicles are subject to change without notice. * = Top speed attained on closed course. Rev. No. 3 - 13/04/06 
|
|
|
www.Race24.com: International motorcycle racing information for teams, sponsors and spectators... |
|
© 2008 Redleg Interactive Media You may download pages from this site for your private use. No other reproduction, re-publication, re-transmission or other re-distribution of any part of this site in any medium is permitted except with the written consent of the copyright owner or in accordance with the provisions of the Copyright, Designs and Patents Act 1988. |